2006
| Title | Book number | Author | abst
ract
|
|---|
| Study on Ignitability of Coating Powder Used in Electrostatic Powder Coating System (Part 1) | RR-2005-01 | Kwang-Seok CHOI, Mizuki YAMAGUMA and Jae-Hee JOUNG | abst
|
| On the Assessment Methods of Electrostatic Hazards during Liquid Spraying | RR-2005-02 | Atsushi OHASAWA | abst
|
| Centrifugal Modelling of Rockfall Simulation Associated with Rock Fracturing | RR-2005-03 | Kazuya ITOH, Yasuo TOYOSAWA, and Osamu KUSAKABE | abst
|
| Study on Prevention Methods of Falling from the Eaves of the Roof | RR-2005-04 | Yasumichi HINO | abst
|
| A Study on an Accident Prevention System Using RFID for the Restart of Machinery in the Spacious Dangerous Areas | RR-2005-05 | Kiyoshi FUKAYA | abst
|
| Static Eliminating Properties of Incendiary Discharge-Free, Nozzle-Type Electrostatic Neutralizer | RR-2005-06 | K.S.CHOI, M.YAMAGUMA, T.KODAMA, T.SUZUKI, and T.MOGAMI | abst
|
| Fatigue Crack Monitoring of the High-Strength Aluminum Alloy Lap Joint and its Fatigue Fracture Properties | RR-2005-07 | Tetsuya SASAKI, Takashi HONDA | abst
|
| Development of NIIS-Mark II Centrifuge | RR-2005-08 | Kazuva ITOH. Satoshi TAMATE. Yasuo TOYOSAWA. and Noriyuki HORII | abst
|
2005
| Title | Book number | Author | abst
ract
|
|---|
| An Inquiry into Basic Safety Requirements of Field-bus Network for Safety Control | RR-2004-01 | Tsuyoshi SAITO, Hideo NAKAMURA and Masaki MIURA | abst
|
| Method for Characterizing Fracture Surface by using Two-Dimensional Local Hurst Exponent and its Application to the Quantative Evaluation of Stretched-Zone Width and Estimation of JIc | RR-2004-02 | Kenta YAMAGIWA and Takashi HONDA | abst
|
| Study on the Mechanism of Generating Lateral Earth Pressures using Centrifuge with Movable Earth Support Equipment | RR-2004-03 | Yasuo TOYASAWA, Kazuya ITOH and Surendra B. TAMRAKAR | abst
|
| Tensile Strength of Soil Measured using Newly Developed Tensile Strength Apparatus | RR-2004-04 | Surendra B. TAMRAKAR, Yasuo TOYASAWA and Kazuya ITOH | abst
|
| Experimental Study to Reduce the Damage in Both Quay Walls and River Dikes related to the Lateral Flow of the Ground | RR-2004-05 | Satoshi TAMATE, Ikuo TOHATA and Tsuyoshi HONDA | abst
|
| Study on Earthquake Resistibility of Container Cranes and Jib Cranes | RR-2004-06 | Seiji TAKANASHI and Yasumichi HINO | abst
|
| Development of Passive-Type Electrostatic Eliminator for Pneumatic Powder Transport | RR-2004-07 | Tsutomu KODAMA, Mizuki YAMAGUMA, Teruo SUZUKI and Tomofumi MOGAMI | abst
|
| An Inspection of Contact Failure of Connector on the Electric Circuit for Signal Use | RR-2004-08 | Tatsuo MOTOYAMA, Hajime TOMITA and Kenji NAKATA | abst
|
| Theoretical Evaluation of Electrostatic Properties of Thin Materials with Grounded Backing Conductor | RR-2004-09 | Atsushi OHSAWA | abst
|
| Measurement and Countermeasures of Induced Electromagnetic Field on a Rough-Terrain Crane due to Medium Frequency | RR-2004-10 | Hajime TOMITA | abst
|
2004
| Title | Book number | Author | abst
ract
|
|---|
| Earthquake Resistibility of Floor-Climbing Cranes | RR-2003-01 | Masayuki YOSHIMI and Seiji TAKANASHI | abst
|
| A Robot Actuator and a Safety Interlock System Utilizing Magneto-rheological Fluid | RR-2003-02 | Tsuyoshi SAITO and Hiroyasu IKEDA | abst
|
| Development of the Fail-safe Safety Valve and Safety Control System for Boilers | RR-2003-03 | Shoken SHIMIZU, Tsuyoshi SAITO and Hiroyasu IKEDA | abst
|
| Studies on Dynamic Interactions of Ground, Foundation and Superstructure | RR-2003-04 | Satoshi TAMATE, Yasuo TOYOSAWA, Naoaki SUEMASA, Toshiyuki KATADA and Shuji HIRANO | abst
|
| Stability of Counterfort Sheet Pile Retaining Wall -- For Soft Ground | RR-2003-05 | Yasuo TOYOSAWA, Noriyuki HORII, Norio FUJITA, Mitsuo SATO, Yokihiro SHUKURI and Makoto ETO | abst
|
| A Circuit Model to Estimate Electric Shock Hazard | RR-2003-06 | Eiki YAMANO | abst
|
| Electrostatic Properties of Dust Blown from Bag-Filters and Static Discharge from Layers of Metal Dust on Filter | RR-2003-07 | Mizuki YAMAGUMA and Tsutomu KODAMA | abst
|
| Development of a Static Charge Neutralizer using an Atmospheric Pressure Glow Discharge | RR-2003-08 | Atsushi OHSAWA | abst
|
| Computational Assessment of Electrostatic Hazards in Silo Filling Operations | RR-2003-09 | Atsushi OHSAWA | abst
|
| Suppression of Incendiary Electrostatic Discharge in a Silo using a New Electrostatic Charge Eliminator for Powder | RR-2003-10 | Tsutomu KODAMA, Teruo SUZUKI and Tomofumi MOGAMI | abst
|
2003
| Title | Book number | Author | abst
ract
|
|---|
| Time-Frequency Analysis of Ultrasonic Echoes and its Application to Nondestructive Evaluation of Thermal Damage of Steel | RR-2002-01 | Shiwei MA, Tetsuya SASAKI, Etsuji YOSHIHISA and Takashi HONDA | abst
|
| Requirements of Prevention Equipment against Falling from Roof | RR-2002-02 | Yasumichi HINO | abst
|
| Fundamental Study on Wind Pressure Acting on Temporary Scaffolds | RR-2002-03 | Yasumichi HINO, Katsutoshi OHDO, Songpol PHONGKUMSING, Eizo MARUTA and Makoto KANDA | abst
|
| Stability of Counter forted-type Sheet Pile Retaining Wall -- For Sandy Ground | RR-2002-04 | Yasuo TOYOSAWA, Noriyuki HORII, Satoshi TAMATE, Makoto ETOH, Mitsuo SATO, Mitsuru EGUCHI and Norio FUJITA | abst
|
| Survey on Commuting Stress and Accidental Falls of Elderly Workers on the Way to and from Work -- Building-Maintenance Industry | RR-2002-05 | Hisao NAGATA and Sunyoung LEE | abst
|
| The Dependence of Initial Pressure for the Autoignition Temperature of Flammable Liquid | RR-2002-06 | Haruhiko ITAGAKI | abst
|
| Study of Terms Connection in the Database for Explosion and Fire Accidents | RR-2002-07 | Teruhito OTSUKA and Haruhiko ITAGAKI | abst
|
| Characteristics of a New Apparatus for Measuring Ignition Energy of Dust Clouds having a Dispersion Mechanism by Ultrasonic Vibration | RR-2002-08 | Mizuki YAMAGUMA, Kwang-SEOK CHOI and Tsutomu KODAMA | abst
|
| Electromagnetic Disturbance of Large-Scale Crane due to Medium Broadcasting and Countermeasures | RR-2002-09 | Hajime TOMITA | abst
|
| Questionnaire Survey regarding Manual AC Arc Welding Operation | RR-2002-10 | Tatsuo MOTOYAMA, Hajime TOMITA and Eiki YAMANO | abst
|
| Study on Usage of Safety Belt and Scope of Airbag for Fall Protection | RR-2002-11 | Kiyoshi FUKAYA | abst
|
2002
| Title | Book number | Author | abst
ract
|
|---|
| The Three Dimensional Stress Analysis and Fatigue Strength Evaluation of Link Chains in Chain Hoists | RR-2001-1 | Takashi HONDA | abst
|
| Experimental Study of Failure Characteristics of the Ground Causing the Overturning of Mobile Cranes | RR-2001-2 | Satoshi TAMATE | abst
|
| Research of Earthquake Resistance of Tower Crane for Construction | RR-2001-3 | Seiji TAKANASHI and Yutaka MAEDA | abst
|
| Decomposing Detonation Propagation Properties of Ozone / Oxygen mixtures | RR-2001-4 | Takaaki MIZUTANI and Hidenori MATSUI | abst
|
| New Evaluation Method for Antistatic Efficiency of Floors and Floor Coverings | RR-2001-5 | Atsushi OHSAWA | abst
|
| Statistical Analysis of Industrial Accidents by Risk Curve | RR-2001-6 | Shigeo HANAYASU, Masao KAJIYAMA and Kazuyoshi SEKINE | abst
|
2001
| Title | Book number | Author | abst
ract
|
|---|
| Modeling and Servo System of the Compliant Actuator Controlled by Field-Sensitive Fluid | RR-2000-1 | Noboru SUGIMOTO and Tsuyoshi SAITO | abst
|
| Application of Finite Element Analysis to Residual Stress Measurement with Hole Drilling Method | RR-2000-2 | Takashi HONDA | abst
|
| Measurement of Autoignition Temperatures of Flammable Liquids Using 1 Liter Round Vessel | RR-2000-3 | Haruhiko ITAGAKI | abst
|
| Decomposition Flame Propagation Properties of Ozone/Oxygen Mixtures | RR-2000-4 | Takaaki MIZUTANI and Hidenori MATSUI | abst
|
| Propagation Brush Discharge Occurring on Insulating Inner-Bag Used with Anti-Static FIBC and Its Countermeasures | RR-2000-5 | Mizuki YAMAGUMA and Tsutomu KODAMA | abst
|
| Fire Spread over Metal Dust Layer | RR-2000-6 | Masaaki YASHIMA and Toei MATSUDA | abst
|
| Effect of Air-Bag Support for Prevention of Trench Collapse in Centrifuge Tests | RR-2000-7 | Yasuo TOYOSAWA, Noriyuki HORII, Satoshi TAMATE, Tomohiro YAMADA and Hiroaki HAJYOUTA | abst
|
2000
| Title | Book number | Author | abst
ract
|
|---|
| Survey on Improving Occupational Environments in the Rapidly Aging Society Part 2 -- Conditions of Care Work in Xursing Homes and the Prospects for Elderly Care Workers | RR-99-1 | Hisao NAGATA and Sunyoung LEE | abst
|
| Ignition Characteristics of Zirconium Dust | RR-99-2 | Toei MATSUDA and Masaaki YASHIMA | abst
|
| Ignition and Explosion Characteristics of Tantalum Dust | RR-99-3 | Toei MATSUDA and Mizuki YAMAGUMA | abst
|
| Analysis and Experimental Study on Labor Accidents Related to Communication in Construction Work | RR-99-4 | Yoshiyuki EGAWA, Takahiro NAKAMURA, Takuro SHOJI, Kiyoshi FUKAYA, Shigeo HANAYASU and Yoshimi SUZUKI | abst
|
| The Effect of Heat Conduction on the Stress Measurement of the Sheet Specimen by Means of Thermoelastic Effect | RR-99-5 | Takashi HONDA, Tetsuya SASAKI and Teruhito OHTSUKA | abst
|
| Influence of SO2 Gas on Insulation Failure of Wiring Board Caused by Electrochemical Migration | RR-99-6 | Tatsuo MOTOYAMA and Kenji ICHIKAWA | abst
|
| Thermomechanical and Isothermal Fatigue Behaivor of Stainless Steel Type 316 Weldments | RR-99-7 | Etsuji YOSHIHISA, Takashi HONDA and S.G.S.RAMAN | abst
|
| Survey on Organizational Safety Policy and Activity in Construction Industry | RR-99-8 | Takuro SHOJI, Yoshimi SUZUKI, Takahiro NAKAMURA, Yoshiyuki EGAWA, Kiyoshi FUKAYA, Shigeo HANAYASU, Mitsuhiro KOJIMA, Ayako HIROSE, Naoko HASEGAWA and Ken-ichi TAKANO | abst
|
| Spectroscopic Measurements of a Spark Ignition in Methane-Oxygen Mixture | RR-99-9 | Atsushi OHSAWA and Keiichi ISHIKAWA | abst
|
| Hydrolytic Rate of Acid Anhydrides in Heterogeneous Reaction | RR-99-10 | Yasuhiro FUJIMOTO | abst
|
| Decomposition Explosion Properties of Ethylene Oxide under High Temperature and Pressure | RR-99-11 | Takaaki MIZUTANI and Hidenori MATSUI | abst
|
| Failure Mechanism of Tie-Rod Anchored Sheet Pile Wall in Centrifuge Tests | RR-99-12 | Yasuo TOYOSAWA, Noriyuki HORII, Satoshi TAMATE and H.G.B.ALLERSMA | abst
|
1999
| Title | Book number | Author | abst
ract
|
|---|
| A Trial Improvement of Energy of efficiency of Plasma Reactor by Superposing Two Heterogeneous Discharges -- Characteristics of Surface and Corona Discharge Combined Plasma Reactor | RR-98-1 | Mizuki YAMAGUMA and In-Sung WOO | abst
|
| Electromagnetic Noise generated by Spark Discharge -- Dependence of Spark Current and Induced Voltage on Sparking Voltage | RR-98-2 | Hajime TOMITA | abst
|
| Investigation of Overturning of Mobile Crane due to Penetration of Outriggers induced by Failure of Ground | RR-98-3 | Satoshi TAMATE, Noriyuki HORII, Yasuo TOYOSAWA, Naoki SUEMASA and Tosiyuki KATADA | abst
|
| Evaluation of Audibility for Voice Sounds | RR-98-4 | Yoshiyuki EGAWA | abst
|
| An Evaluation of Fall Protection Performance of an Air Bag System | RR-98-5 | Kiyoshi FUKAYA | abst
|
| Survey on Improving Occupational Environments in the Rapidly Aging Society -- Survey for Workers from 40 to 49 Years Old and the Elderly People over 60 Years Old | RR-98-6 | Hisao NAGATA, Akihiko SASAKI, Kazuhiro SAKAI and Sunyoung LEE | abst
|
| Autoignition Limit of Flammable Liquids when Rapidly Compressed by High Pressure Oxygen | RR-98-7 | Haruhiko ITAGAKI | abst
|
| Quenching Behavior of a Propagating Flame in a Duct with Water Sprays | RR-98-8 | Masaaki YASHIMA | abst
|
| Questionnaire Survey to Construction Workers concerning Failling-accident | RR-98-9 | Yoshimi SUZUKI, Shin-nosuke USUI, Yoshiyuki EGAWA and Takuro SHOJI | abst
|
1998
| Title | Book number | Author | abst
ract
|
|---|
| Application of Thermoelastic Effect to Determination of Stress Concentration Factors and Stress Intensity Factors | RR-97-1 | Yoshio KITSUNAI, Takashi HONDA and Tetsuya SASAKI | abst
|
| Evaluation of Human Pain Tolerance for Human-Oriented Robot Design | RR-97-2 | Hiroyasu IKEDA and Noboru SUGIMOTO | abst
|
| Statistical Analysis on Human Factors concerning Falling-accident in Construction Works | RR-97-3 | Yoshimi SUZUKI, Shin-nosuke USUI, Yoshiyuki EGAWA and Takuro SHOJI | abst
|
| Stability of Composite Ground Improved by Deep Mixing Method during Construction of Embankments | RR-97-4 | Noriyuki HORII, Yasuo TOYOSAWA, Satoshi TAMATE, Hideo HASHIZUME and Yasuhiko OKOCHI | abst
|
| Deformation and Failure Behavior of Anchored Retaining Wall Induced by Excessive Exacavation in Centrifuge Model Tests | RR-97-5 | Yasuo TOYOSAWA, Noriyuki HORII and Satoshi TAMATE | abst
|
| Dust Explosibility of Magnesium and Its Alloys | RR-97-6 | Toei MATSUDA | abst
|
| Study on Chemical Reaction Hazards of Organic Solvents (2nd Report) -- Reaction Mechanism of Epichlorohydrin-Dimethylsulfoxide Mixture | RR-97-7 | Takayuki ANDO | abst
|
| Estimation of Activation Energy for Decomposition of Unstable Substances | RR-97-8 | Teruhito OHTSUKA | abst
|
| Insulation Degradation of Printed Circuit Board Caused by Electrochemical Migration | RR-97-9 | Tatsuo MOTOYAMA and Kenji ICHIKAWA | abst
|
| Self-Consistent Simulation of Charged Powders and its Application to Evaluating Electrostatic Hazards | RR-97-10 | Atsushi OHSAWA | abst
|
1997
| Title | Book number | Author | abst
ract
|
|---|
| A Study on the Compliant Actuators by Means of Electro-Rheological Fluids (ERF) | RR-96-1 | Noboru SUGIMOTO | abst
|
| Statistical Quantification Analysis on Free-terms Extracted from Descriptive Statements of the Occupational Accident Reports in Construction Works | RR-96-2 | Yoshimi SUZUKI | abst
|
| Development of Numerical Simulation Method for the Ground Flow Caused by Seismic Liquefaction | RR-96-3 | Satoshi TAMATE | abst
|
| SADT Values of Solid Organic Chemicals of the Pseud-autocatalytic Decomposition Type | RR-96-4 | Takashi KOTOYORI | abst
|
| Influence of Stirring on Exothermic Rate of Liquid-liquid Reactions (2) -- Polymerization of Epichlorohydrin | RR-96-5 | Yasuhiro FUJIMOTO | abst
|
| Effects of Electromagnetic Noises on Electronic Circuits and Electrostatic Protection of Semiconductor Devices | RR-96-6 | Hajime TOMITA and Yasuyuki TABATA | abst
|
| Electromagnetic Susceptibility of Photo-electric Safety Device for Power Press to Conductive Electromagnetic Disturbance | RR-96-7 | Hajime TOMITA | abst
|
1996
| Title | Book number | Author | abst
ract
|
|---|
| Low Velocity Control of a Pneumatic Cylinder -- The Effect of Nonlinear Friction on Pneumatic Cylinder Motion and the Compensatory Method Using ERF | RR-95-1 | Hiroyasu IKEDA and Noboru SUGIMOTO | abst
|
| Fundamental Structure of Safety Control System -- Principles of Safety Control and Configulation Method for Fail-safe System | RR-95-2 | Noboru SUGIMOTO, Shigeo UMEZAKI, Hiroyasu IKEDA, Soichi KUMEKAWA and Kiyoshi FUKAYA | abst
|
| Error Detection by Coded Microprocessor and Its Evaluation | RR-95-3 | Hiroyasu IKEDA | abst
|
| Strength of Softwood-Plywood Used for Scaffold Planks | RR-95-4 | Yoshimasa KAWAJIRI and Katsutoshi OHDO | abst
|
| Imbalance of Human Standing Posture with High Heeled Shoes | RR-95-5 | Hisao NAGATA | abst
|
| Influence of Weather on Work Efficiency in Construction of Tall Structures | RR-95-6 | Katsutoshi OHDO | abst
|
| Chemical Reaction Hazards of Organic Solvents (1st Report) -- Thermal Stability of Epichlorohydrin-Dimethysulfoxide Mixture | RR-95-7 | Takayuki ANDO | abst
|
| Influence of Stirring on Exothermic Rate of Liquid-liquid Reactions | RR-95-8 | Yasuhiro FUJIMOTO | abst
|
| Thermal Reactivity of Neodymium-Iron alloy | RR-95-9 | Teruhito OHTSUKA and Toshihiro HAYASHI | abst
|
| Suppression of Incendiary Electrostatic Discharges between Charged Liquid and Grounded Conductor | RR-95-10 | Tsutomu KODAMA and Yasuyuki TABATA | abst
|
| Influence of Ozone on Insulation Deterioration of Wiring Board Composed of Organic Materials | RR-95-11 | Tatsuo MOTOYAMA and Kenji ICHIKAWA | abst
|
1995
| Title | Book number | Author | abst
ract
|
|---|
| A Construction Method of Safety Work System Based on Confirming Rotation Stop | RR-94-1 | Noboru SUGIMOTO | abst
|
| On the Buckling Coefficients Used for the Calculation of Crane Structure | RR-94-2 | Yutaka MAEDA | abst
|
| A Basic Study on the Fatigue Crack Monitoring Using Strain Gages | RR-94-3 | Tetsuya SASAKI | abst
|
| Evaluation of Loudness for Intermittent Noise Based on Personal Auditory Characteristics | RR-94-4 | Yoshiyuki EGAWA | abst
|
| A study on Human Factors for Accident Prevention by Analysis of Near-Accident Reports | RR-94-5 | Shinnosuke USUI | abst
|
| Analysis of Buckling Load on the Wedge-Type Shorings -- On Buckling Load of Semi-Rigid Frames without Braces | RR-94-6 | Katsutoshi OHDO, Yoshimasa KAWAJIRI and Katsunori OGAWA | abst
|
| Failure Characteristics of Sheet Pile Wall in Centrifuge Tests | RR-94-7 | Yasuo TOYOSAWA, Noriyuki HORII and Satoshi TAMATE | abst
|
| Activated Carbon Dust Explosions -- Effects of Ignition Energy on Dust Explosion Parameters | RR-94-8 | Toei MATSUDA and Haruhiko ITAGAKI | abst
|
| Thermal Ignition of the Activated Carbon Used for Waste Treatments | RR-94-9 | Haruhiko ITAGAKI and Toei MATSUDA | abst
|
| Influence of Functional Groups on Thermal Explosion of Nitrobenzene Derivatives | RR-94-10 | Yasuhiro FUJIMOTO | abst
|
| Simple Method of Test for Oxidation Capacity of Solid Chemicals | RR-94-11 | Yasuhiro FUJIMOTO | abst
|
| Explosion Venting into an Enclosed Vessel | RR-94-12 | Haruhiko ITAGAKI and Toshihiro HAYASHI | abst
|
| An Experimental Study on Amplitude of Saturable Reactor Output Current for Application to DC Ground Fault Detection | RR-94-13 | Eiki YAMANO, Kenji ICHIKAWA and Tatsuo MOTOYAMA | abst
|
| Investigation of Transition of Discharge Modes in Radio Frequency Discharge Used in Plasma Processing | RR-94-14 | Atsushi OHSAWA and Yasuyuki TABATA | abst
|
1994
| Title | Book number | Author | abst
ract
|
|---|
| Effect of Thermal Aging on Degradation of Pressure Vessel Steel | RR-93-1 | Yoshio KITSUNAI and Takashi HONDA | abst
|
| Experimental Stress Analysis of Gusset Welded Joints by Differential Infrared Thermography | RR-93-2 | Etsuji YOSHIHISA | abst
|
| Omission Sensitivity Study on the Reliability Analysis of Crack Growth Fatigue Life | RR-93-3 | Tetsuya SASAKI | abst
|
| Simulation of Stress Spectrum Derived from the Load Lifting by a Mobile Crane | RR-93-4 | Yutaka MAEDA | abst
|
| Development of Safety System for Positive Clutch Type Press | RR-93-5 | Shoken SHIMIZU, Soichi KUMEKAWA and Shigeo UMEZAKI | abst
|
| On the Load Acts on Scaffolds Installed with a Pipe for Placing Concrete by a Pump | RR-93-6 | Yoshimasa KAWAJIRI, Katsunori OGAWA and Katsutoshi OHDO | abst
|
| Safety Dimensions of Tread and Rise in Considering the Psychological Load while Descending Stairs | RR-93-7 | Hisao NAGATA | abst
|
| A Study on Some Causal Factors of Action Slip and Mistake | RR-93-8 | Shinnosuke USUI | abst
|
| Statistical Quantification Analysis on Free-terms Extracted from Descriptive Statements of the Occupational Accident Report Concerning Construction Works | RR-93-9 | Yoshimi SUZUKI | abst
|
| Historical Review on the Statistical Analysis of Occupational Accidents | RR-93-10 | Shigeo HANAYASU | abst
|
| Decomposition of Chlorofluorocarbons by Use of Gaseous Explosion | RR-93-11 | Hidenori MATSUI | abst
|
| Critical Temperatures for the Thermal Explosion of Liquid Organic Peroxides | RR-93-12 | Takashi KOTOYORI | abst
|
| Anisotropic Properties for Dielectric Characteristics on Composite Insulating Materials | RR-93-13 | Kenji ICHIKAWA and Tatsuo MOTOYAMA | abst
|
| Detection of Electrostatic Field Diverged from Charged Cloud Formed by Fluidized Particles | RR-93-14 | Yasuyuki TABATA and Tsutomu KODAMA | abst
|
| Study on Influence of Electromagnetic Noise Radiated by Electrostatic Discharge on Signal Transmission Lines of Electronic Equipments | RR-93-15 | Hajime TOMITA and Yasuyuki TABATA | abst
|
1993
| Title | Book number | Author | abst
ract
|
|---|
| Residual Stress Measurements in Butt-Welded Plates by X-Ray and Hole-Drilling Strain-Gage Methods | RR-92-1 | Etsuji YOSHIHISA | abst
|
| Development of a General Purpose Structural Reliability Analysis Code Jointly Based on the AFOSM Method and the Monte Carlo Simulation with Importance Sampling | RR-92-2 | Tetsuya SASAKI | abst
|
| Fundamental Research of Emergency Stop Mechanism for Power Press | RR-92-3 | Shigeo UMEZAKI, Shoken SHIMIZU and Soichi KUMEKAWA | abst
|
| Structural Requisites of Actuator for Grouping Motion and Its Realization | RR-92-4 | Hiroyasu IKEDA and Noboru SUGIMOTO | abst
|
| Safety Control Theory Based on the Logic of Safety -- Energy Transmition of Safety Information | RR-92-5 | Noboru SUGIMOTO and Hiroyasu IKEDA | abst
|
| Evaluation of Noise Control for Impact-Machines for Construction Work | RR-92-6 | Yoshiyuki EGAWA | abst
|
| Deformation Behavior at Failure of Saturated Cohesive Soil Model Grounds in Geotechnical Centrifuge Model Tests | RR-92-7 | Noriyuki HORII, Satoshi TAMATE and Yasuo TOYOSAWA | abst
|
| Safety Dimensions of Tread and Stairs in Considering Visual Perceptive Errors | RR-92-8 | Hisao NAGATA | abst
|
| A study on the Time Intervals between Occupational Accidents (6) | RR-92-9 | Shigeo HANAYASU | abst
|
| An Information Analysis by Statistical Method for the Descriptive Statements of the Occupational Accident Report Concerning Construction Work | RR-92-10 | Yoshimi SUZUKI | abst
|
| Relationship between Chemical Structure and Thermal Stability of Reactive Chemicals (3rd Report) -- Thermal Decomposition of Nitrophenylhydrazine Isomers | RR-92-11 | Takayuki ANDO and Yasuhiro FUJIMOTO | abst
|
| Prediction of Exothermic Onset-Temperature for Benzene Derivatives with Fuzzy Reasoning | RR-92-12 | Yasuhiro FUJIMOTO | abst
|
| Laboratory Studies on Spontaneous Combustion of Coal Bed in Pulverizer | RR-92-13 | Haruhiko ITAGAKI | abst
|
| Ignition Hazards of Hydrogen-Air Mixture Caused by Spark Discharge with Switching in Radio Frequency Resistative Circuit | RR-92-14 | Tatsuo MOTOYAMA | abst
|
| Detoxification of Hazardous Gaseous Substances by Discharge Plasma -- Decomposition of Aromatic Organic Solvents by Surface Discharge Plasma | RR-92-15 | Shigeo YAMAGUMA, Atsushi OHSAWA, Tsutomu KODAMA and Yasuyuki TABATA | abst
|
1991
| Title | Book number | Author | abst
ract
|
|---|
| On the Stress of Bolts of the Slewing Circle of a Truck Crane Extracting Sheet Piles | RR-91-1 | Yutaka MAEDA | abst
|
| Fail-safe Combustion Control and Flame Detective Sensor for Small-sized Boiler | RR-91-2 | Shoken SHIMIZU, Noboru SUGIMOTO, Hiroyasu IKEDA and Shigeo UMEZAKI | abst
|
| Study on Fail-Safe Mechanism for Power Press Control | RR-91-3 | Shigeo UMEZAKI, Hiroyasu IKEDA, Shoken SHIMIZU, Soichi KUMEKAWA and Noboru SUGIMOTO | abst
|
| Statistical Analysis on the Damage Consequences of Occupational Accidents | RR-91-4 | Shigeo HANAYASU | abst
|
| Analysis on Properties of Information Concerning Labour Accident in Tunnel Construction Work | RR-91-5 | Yoshimi SUZUKI | abst
|
| Stability of Slope Reinforced with Geogrid | RR-91-6 | Yasuo TOYOSAWA and Satoshi TAMATE | abst
|
| Dust Explosion Characteristics of Rare Earth Metal Alloys | RR-91-7 | Marek WOLINSKI and Toshihiro HAYASHI | abst
|
| Study on the Relationship between Chemical Structure and Thermal Stability of Reactive Chemicals (2nd Report) -- Thermal Decomposition of Nitrophenylacetic Acid Isomers | RR-91-8 | Takayuki ANDO | abst
|
| Consideration of Hazard Test Methods for Reactive Chemicals. | RR-91-9 | Haruhiko ITAGAKI, Yasuhiro FUJIMOTO, Takayuki ANDO, Toei MATSUDA and Takashi KOTOYORI | abst
|
| Observations on Motility of Rabbit in Exposure to 2.5 V/m Electric Field in Water | RR-91-10 | Eiki YAMANO and Tatsuo MOTOYAMA | abst
|
| Thermal Deterioration of Natural Rubber Insulating Material and its Evaluation | RR-91-11 | Kenji ICHIKAWA | abst
|
| A Study on Electrostatic Coagulation of Bipolarly Charged Mists | RR-91-12 | Shigeo YAMAGUMA, Tsutomu KODAMA and Yasuyuki TABATA | abst
|
1990
| Title | Book number | Author | abst
ract
|
|---|
| The Influence of Hydrogen Gas Atmosphere on Fatigue Crack Growth Behaviours in Structural Steel SB42 -- In the Case of 1 atm Hydrogen | RR-90-1 | Masazumi TANAKA | abst
|
| On the Structuring of an Inherently Fail-Safe System and Multiphasic Safety Design | RR-90-2 | Yoshinobu SATO | abst
|
| Analysis of Labour Accidents in Tunnel Construction Work -- According to its Work-Stages | RR-90-3 | Yoshimi SUZUKI and Shigeo HANAYASU | abst
|
| Study on Slip-Resistance Measurements for Footwear (2nd report) -- Development of Measuring System for Slip-Resistance | RR-90-4 | Hisao NAGATA | abst
|
| Explosion Characteristics of Flammable Gas-Dust Mixtures -- Explosion of Hydrogen-Cornstarch-Air Mixture | RR-90-5 | Toshihiro HAYASHI, Toei MATSUDA and Hidenori MATSUI | abst
|
| Measurement of Lower Explosibility Limits of Dusts Dispersed in Air in a Large Scale Vertical Tube | RR-90-6 | Toei MATSUDA and Toshihiro HAYASHI | abst
|
| Prediction of Thermal Hazard Data of Benzene Derivatives by Multivariate Statistical Analysis on Their Chemical Structure | RR-90-7 | Yasuhiro FUJIMOTO, Takayuki ANDO, Haruhiko ITAGAKI and Shigeru MORISAKI | abst
|
| Resistance against High-Voltage, Low-Current Dry Arc for Electrical Insulating Materials of Organic Solid in Pressurized Air | RR-90-8 | Tatsuo MOTOYAMA | abst
|
| Electrostatic Charging of Dielectric Liquids Mixed with Powders Caused by Agitation | RR-90-9 | Tsutomu KODAMA and Yasuyuki TABATA | abst
|
| Historical Review of Occupational Accident Data Acquisition System in Japan and International Comparison of Accident Indicators | RR-90-10 | Shigeo HANAYASU | abst
|
1989
| Title | Book number | Author | abst
ract
|
|---|
| The Influence of Size and Aqueous Environment on Fatigue Crack Growth Behaviours in Large Structural Low-Carbon Steels | RR-89-1 | Masazumi TANAKA | abst
|
| Fatigue of Fine Grain Grinding Wheels Binded with Organic Bond | RR-89-2 | Soichi KUMEKAWA | abst
|
| Evaluation of the Loudness for Quasi-Steady Impulsive Noise | RR-89-3 | Yoshiyuki EGAWA | abst
|
| Study on Slip-Resistance Measurements for Footwear (1st Report) -- Fundamentals of Measuremant | RR-89-4 | Hisao NAGATA | abst
|
| A study on the Time Intervals between Accident (5) | RR-89-5 | Shigeo HANAYASU | abst
|
| Study on Test Methods and Evaluation of Hazardous for Dangerous Materials | RR-89-6 | Hidenori MATSUI, Takayuki ANDO, Yasuhiro FUJIMOTO and Shigeru MORISAKI | abst
|
| Static Electrification of Dielectric Liquids Caused by Agitation | RR-89-7 | Tsutomu KODAMA and Yasuyuki TABATA | abst
|
| Nuisances on Electronic Device due to Electromagnetic Wave Radiated with Electrostatic Discharge | RR-89-8 | Yasuyuki TABATA and Hajime TOMITA | abst
|
| Threshold of Convulsion for Electric Shocks due to Underwater A.C. Uniform Electric Fields | RR-89-9 | Eiki YAMANO and Tatsuo MOTOYAMA | abst
|
1988
| Title | Book number | Author | abst
ract
|
|---|
| Application of Fracture Mechanics to Estimating Strength of Lifting Link Chains | RR-88-1 | Yoshio KITSUNAI | abst
|
| The Basic Safety Design for Control of Intelligent Mobile Robots | RR-88-2 | Yoshinobu SATO | abst
|
| A Study on the Time Intervals between Accidents (4) | RR-88-3 | Shigeo HANAYASU | abst
|
| An Experimental Development of the Data Base "SAFE" (Data Base System for Labour Accident Fact Exploration)(2nd Report) -- Development of the Information Retrieval Supptot System | RR-88-4 | Yoshimi SUZUKI, Yutaka MAEDA, Shigeo HANAYASU and Takayuki ANDO | abst
|
| Thermal Stability of Sodium Azide | RR-88-5 | Yasuhiro FUJIMOTO, Takayuki ANDO and Shigeru MORISAKI | abst
|
| Experimental Study on the Methods of Explosion Venting (4th Report) -- On the Behaviours of Flying-off Type Explosion Relief | RR-88-6 | Toshihiro HAYASHI | abst
|
| Influence of Turbulence on Dust Explosion in a Closed Vessel | RR-88-7 | Toei MATSUDA | abst
|
| Consideration of Prevention Method against Electric Shock Underwater -- Shield Effect of Fault Current by GroundedMesh Set Underwater | RR-88-8 | Tatsuo MOTOYAMA and Eiki YAMANO | abst
|
1987
| Title | Book number | Author | abst
ract
|
|---|
| Prediction of Fatigue Crack Growth Lives in High Strength Steel Weldments under Low Temperatures | RR-87-1 | Yoshio KITSUNAI and Etsuji YOSHIHISA | abst
|
| Principle and Logic of Safety in Man-Machine System | RR-87-2 | Noboru SUGIMOTO | abst
|
| Construstion of Man-Machine Interlocking System for Remote Control Robots | RR-87-3 | Noboru SUGIMOTO and Hiroyasu IKEDA | abst
|
| The Architectionic Principles and Designing of Hazard Control | RR-87-4 | Yoshinobu SATO | abst
|
| Simple Shear Testing Method using Torsional Shear Apparatus and Strength-Deformation Characteristics of Sand in Torsional Simple Shear | RR-87-5 | Noriyuki HORII | abst
|
| Analysis of Fatal Accidents by Fall in the Building Construction Work | RR-87-6 | Yasuo TOYOSAWA and Hisao NAGATA | abst
|
| Experimental Development of the Data Base 'SAFE' (Data Base System for Labour Accident Fact Exploration) | RR-87-7 | Yoshimi SUZUKI and Yutaka MAEDA | abst
|
| Statistical Analysis of Accidents in Bllet Train Consruction Work | RR-87-8 | Shigeo HANAYASU and Yoshimi SUZUKI | abst
|
| Critical Ignition Temperatures of Chemical Substances | RR-87-9 | Takashi KOTOYORI | abst
|
| Dust Explosions in a Cyclone System | RR-87-10 | Toei MATSUDA and Toshihiro HAYASHI | abst
|
| Flame Propagation Characteristics of Flowing Dust-Air Mixtures in a Tube | RR-87-11 | Toei MATSUDA | abst
|
| On the Cause of Accidental Explosion of Oxygen Hoses | RR-87-12 | Hidenori MATSUI and Kougaku KOMAMIYA | abst
|
| Diagnosis of Degradation of Rubber Insulation Gloves for Use in High Voltage Working -- Thermal Degradation of Natural Rubbor Insulationg Material | RR-87-13 | Kenji ICHIKAWA and Ryuji TANAKA | abst
|
| Protection Effects of DC Leakage Operated Circuit Breaker and High Resistance Grounding against Electric Shock Hazard Underwater | RR-87-14 | Eiki YAMANO, Tatsuo MOTOYAMA and Ryuji TANAKA | abst
|
1986
| Title | Book number | Author | abst
ract
|
|---|
| Fatigue Crack Growth Behavior and Fracture Toughness of Structural Steels under Low Temperatures | RR-86-1 | Yoshio KITSUNAI | abst
|
| Evaluation of the Effect of Residual Stresses on the Fatigue Crack Growth Behavior of Welded Joins in Steel | RR-86-2 | Yoshio KITSUNAI and Etsuji YOSHIHISA | abst
|
| Study on Auditory Warning Alarms of Automated Guided Vehicles | RR-86-3 | Yoshiyuki EGAWA | abst
|
| Safety Assessment of Automated Production Systems Using Microelectoronics (4th Report) -- Evaluation of Hazard Controllability of an Industrial Robot (Part 1) | RR-86-4 | Yoshinobu SATO | abst
|
| Considerations of the Safety Assessment of Construction Work under Compressed Air Condition -- Determination of Coefficients in the Formula for Danger Potential and Development of the Computer Interactive Safety Evaluation System | RR-86-5 | Yoshimi SUZUKI and Ikuo MAE | abst
|
| A study on the Time Intervals between Accidents (3) | RR-86-6 | Shigeo HANAYASU | abst
|
| The Effect of Air Velocity on Minimum Ignition Energy for Flowing Dust-Air Mixture in a Tube | RR-86-7 | Toei MATSUDA | abst
|
| Characteristics of Gaseous Explosions in a Vessel with a Complex Inner Structure, and Pressure Venting by Rupture Disks | RR-86-8 | Toshihiro HAYASHI and Hidenori MATSUI | abst
|
| Systematization of Spontaneous Ignition Temperatures of Organic Compounds (2nd Report) -- Spontaneous Ignition Temperatures of Alkyl Esters and Alkyl Acids | RR-86-9 | Shozo YAGYU | abst
|
| Study on the Relationship between Chemical Structure and Thermal Stability of Reactive Chemicals (1st Report) -- Isomeric Effect on Decomposition Characteristics (Part 1) | RR-86-10 | Takayuki ANDO and Shigeru MORISAKI | abst
|
| Monitoring of Insulation of Power Supply Lines Underwater and Detection of Earth-Leakage Current | RR-86-11 | Tatsuo MOTOYAMA and Eiki YAMANO | abst
|
| Considerations for Electrostatic Noise Caused by Electrostatic Discharge | RR-86-12 | Yasuyuki TABATA and Hajime TOMITA | abst
|
1985
| Title | Book number | Author | abst
ract
|
|---|
| Fatigue Crack Growth Behavior in Thick-Walled Cylinders Subjected to Cyclic Internal Pressure | RR-33-1 | Etsuji YOSHIHISA | abst
|
| Explosion Characteristics of Mixtures with Air of Propane, Ethylene or Hydrogen -- With Special Reference to Testing Method for Flameproof Enclosure of Electrical Apparatus | RR-85-1 | Toshihiro HAYASHI, Ryuji TANAKA and Katsuhiro SAKANUSHI | abst
|
| Experimental Study on the Methods of Explosion Venting (3rd Report) -- Practical Method of Design for Ruputure-Diaphraghm Type Explosion Reliefs | RR-85-2 | Toshihiro HAYASHI | abst
|
| Safety Assessment of Automated Production Systems Using Microelectoronics (2nd Report) -- The Comprehensive Logic Models for the Analysis of Accidents Caused by Robots (Part 1) | RR-85-3 | Yoshinobu SATO | abst
|
| Critical lgnition Temperatures of Wood Sawdust Layers | RR-85-4 | Takashi KOTOYORI | abst
|
| Safety Assessment of Automated production Systems Using Microelectronics(3rd Report) -- Quantification of the Priority-AND-Failure Logic Consisting of Repairable Input Events | RR-85-5 | Yoshinobu SATO | abst
|
| On the Stress of Bolts of the Slewing Circle of a Truck Crane | RR-85-6 | Yutaka MAEDA | abst
|
| Pre-conditional Function of Sensors for Securing Safety | RR-85-7 | Souichi KUMEKAWA, Noboru SUGIMOTO and Kiyoshi FUKAYA | abst
|
| Study on the Possibility of Safety Belt's Slipping out of Buckle | RR-85-8 | Kiyoshi FUKAYA | abst
|
| Analysis of Accidents in Tunnel Construction Work (4) | RR-85-9 | Shigeo HANAYASU | abst
|
| Analysis on Processes of Labour Accidents -- Case Study of the Joetsu-Shinkansen Construction Work | RR-85-10 | Yoshimi SUZUKI | abst
|
| Durability of Plywood Scaffold Planks and Nethod of Strength Test | RR-85-11 | Yoshimasa KAWAJIRI | abst
|
| Threshold for Electric Shocks under Water Causing Suffocation of Rabbits -- Change of Threshold due tu Conductivity of Water and Body Arrangemsnts | RR-85-12 | Eiki YAMANO and Tatsuo MOTOYAMA | abst
|
| Degradation of Rubber Insulating Gloves used in High Voltage Electrical Working | RR-85-13 | Kenji ICHIKAWA | abst
|
| Considerations of Electrostatic Potential of Charged Insulator Measured by Use of Potentiometer of Induction Type | RR-85-14 | Yasuyuki TABATA | abst
|
1984
| Title | Book number | Author | abst
ract
|
|---|
| A tree dimensional computational analysis of the wind loads on canvason or panel covered over the scaffold structure around a tall building | RR-32-2 | Kinichi KINOSHITA | abst
|
| A study on Time Intervals between Occupational Accidents (II) | RR-32-3 | Shigeo HANAYASU | abst
|
| Stability on the Saddle-type Beam for Powered Platform | RR-32-4 | Yoshimasa KAWAJIRI and Yoshitada MORI | abst
|
| Safety Assessment of Automated Production Systems Using Microelectronics (1st Report) -- Energy-Transfer Chains and Hazards of Industrial Robots | RR-32-5 | Yoshinobu SATO, Noboru SUGIMOTO and Ikuo MAE | abst
|
| Behaviour or two Rupture Disks when a Chamber Constituted by them is Pressurized by a Gas and the Quick Releasing Method of Explosion | RR-32-6 | Heizaburo TSURUMI | abst
|
1980
| Title | Book number | Author | abst
ract
|
|---|
| Quenching Limits of Initial Flames in Narrow Tubes -- An Approach to the Study of Quenching Volume | RR-28-1 | Toshihiro HAYASHI | abst
|
| Estimating Procedure of Critical Ignition Temperature and Self-heating Behaviors of Some Materials | RR-28-2 | Takashi KOTOYORI and Michio NAITO | abst
|
| A Fracture Mechanics and Fractographic Study on the Fatigue Crack Propagation Behaviours in Some Castings | RR-28-3 | Masazumi TANAKA | abst
|
| Application of a Maximum Tensile Strain Criterion to the Fracture of Grinding Wheels -- A Case of the Fracture of Vitrified Grinding Wheels under Diametral Compression Test | RR-28-4 | Soichi KUMEKAWA and Etsuji YOSHIHISA | abst
|
| Experimental Investigation on Electrostatic Charging of Spherical Metal in Corona Discharge | RR-28-5 | Yasuyuki TABATA | abst
|
| Bilateral Control of Artificial Fingers System Drived by the Electroviscous Fluid Dynamic Properties of Electro-Viscous-Fluid Clutch (the Winslow Clutch) as on Element of the Control | RR-28-6 | Noboru SUGIMOTO, Taiji KONDO and Kiyoshi FUKAYA | abst
|
1979
| Title | Book number | Author | abst
ract
|
|---|
| Analysis of Accidents in Tunnel Construction Works (3rd report) | RR-27-1 | Ikuo MAE, Shigeo HANAYASU and Noriyuki HORII | abst
|
| Construction and Performance of a Spontaneous Heating Apparatus | RR-27-2 | Takashi KOTOYORI and Michio NAITO | abst
|
| Accident Prevension on Walkways and Stairways (2nd Report) -- Experimental Study of Human Motion on Stairs | RR-27-3 | Hisao NAGATA and Kinichi KINOSHITA | abst
|
| Test-Manufucture of Artificial Fingers (3rd Report) -- Angle and grasping force control in the Artificial Fingers | RR-27-4 | Noboru SUGIMOTO, Taiji KONDO and Kiyoshi FUKAYA | abst
|
| Effect of Microstructure on Fatigue Crack Growth Rate in a High Carbon Steel | RR-27-5 | Yoshio KITSUNAI | abst
|
1976
| Title | Book number | Author | abst
ract
|
|---|
| Interruption of Explosions by Flame Arresters (4th Report) -Factors Affecting on Flame Quenching by Wire Gauzes (1) | RR-24-5 | Toshihiro HAYASHI | abst
|
| Interruption of Explosions by Flame Arresters (5th Report) -Factors Affecting on Flame Quenching by Wire Gauzes (2) | RR-24-6 | Toshihiro HAYASHI | abst
|
| Safety for Electrical Equipment under Artificial Environments(2nd Report) Ignition of Flammable Solid Materials by Low Voltage Inductive Sparks | RR-24-7 | Ryuji TANAKA and Kenji ICHIKAWA | abst
|
| Test-Manufucture of Artificial Fingers (2nd Report) -- Winslow's Effect in Ionic Exchange Resin Disperse System | RR-24-8 | Noboru SUGIMOTO and Taiji KONDO | abst
|
| The Critical Energy for Direct Initiation of Spherical Gaseous Detonations | RR-24-9 | Hidenori MATSUI | abst
|
| A Presumption Method of Grinding Wheel Bursting Speed with Consideration of Stress Gradient | RR-25-1 | Soichi KUMEKAWA | abst
|
| An Electron Fractographic Approach to Quantitative Failure Analysis -- Correlations Between Fracture Surface Appearance and Fracture Mchanics Parameters for Stage II fatigue Crack Propagation in an Alminum Alloy and a Mild Steel | RR-25-2 | Yoshio KITSUNAI and Masazumi TANAKA | abst
|
1975
| Title | Book number | Author | abst
ract
|
|---|
| Fatigue of Vitrified Grinding Wheel | RR-23-4 | Soichi KUMEKAWA | abst
|
| Interruption of Explosions by Flame Arresters (3rd Report) -- Quenching of Acetylen-Air Detonation | RR-23-5 | Toshihiro HAYASHI | abst
|
| Study on Maximum Safe Gap with Propane/Hydrogen with Air Mixtures | RR-24-1 | Heizaburo TSURUMI | abst
|
| Some Studies on Combustion of Irradiated Polyethylene | RR-24-2 | S. MORISAKI | abst
|
| A Quantitative Model of Industrial Accident -- An Assessment of Industrial Risk Based on a Method of Nominal Multivariate Analysis using Conception of Entropy and it's Actual Example of Analysis | RR-24-3 | Yoshinobu SATO, Taiji KONDO, Soichi KUMEKAWA, Noboru SUGIMOTO, Ikuo Mae and Eiki YAMANO | abst
|
| Smouldering Temperature of Combustible Dust Layer | RR-24-4 | T. MATSUDA and M. NAITO | abst
|
1973
| Title | Book number | Author | abst
ract
|
|---|
| On the Dynamic Loads Imposed on Crane Structures -- Shock Loads at Load Lift Up | RR-21-3 | Teizo HAKAMAZUKA, Yoshimasa KAWAJIRI and Soichi KUMEKAWA | abst
|
| Studies of Explosive Chracteristics of Hydrogen (2nd Report) -- Explosion Pressures of Hydrogen-Air Mixtures at High Pressures | RR-21-4 | Shozo YAGYU and Toei MATSUDA | abst
|
| Flame Quenching of Hydrogen-Air Mixtures under Low and Reduced Pressures -- Estimation of Maximum Safe Gaps for Diametral Clearances | RR-22-1 | Toshihiro HAYASHI and Heizaburo TSURUMI | abst
|
| Decaying of Gaseous Detonation by Expansion (Second Report) -- Experiments on Some Fuel-Oxygen Detonations in Circular Tubes | RR-22-2 | Hidenori MATSUI | abst
|
| Test-Manifucture of Artifitial Fingers (1st Report) -- Characeristics of Electro-Fluid as a Control Element | RR-22-3 | Taiji KONDO and Noboru SUGIMOTO | abst
|
1972
| Title | Book number | Author | abst
ract
|
|---|
| Some Studies on Combustion of Irradiated Polyethylene | RR-20-3 | S. MORISAKI | abst
|
| Electron Fractographical Study on th Causes of Metals Failure (2nd Report) -- Analysis of the fatigue striations in the high strength aluminum alloy | RR-20-4 | Eiji AKIYAMA Taiji KONDO and Yoshio KITSUNAI | abst
|
| Decaying of Gaseous Detonation by Expansion (First Report) -- Experiments in Flat Channels for Oxyacetylene Detonations | RR-20-5 | Hidenori MATSUI | abst
|
| Interruption of Explosions by Flame Arresters (First Report) -- On the Quenching Ability of Sintered Metals (1) | RR-21-1 | Toshihiro HAYASHI and Heizaburo TSURUMI | abst
|
| Experimental Study on Micro-Seismic Noises in Rocks (2nd Report) -- Characteristecs in the Generation of Micro-Seismic Noises in Rhyolitic Tuff (Oyaishi) | RR-21-2 | Ikuo MAE and Yoshimi SUZUKI | abst
|
1971
| Title | Book number | Author | abst
ract
|
|---|
| Energy of Acrivation for Oxidative Pyrolysis of Several Plastics | RR-19-4 | Takashi KOTOYORI | abst
|
| The Protective Effect of Safety Guards made of Steel Plate | RR-19-5 | Eiji AKIYAMA and Soichi KUMEKAWA | abst
|
| Safety for Electrical Equipment under Artificial Environments -- Low Voltage D.C. Spark Iginition of Atmosphere CH4 - O2 and CH4 - N2O Mixtures and of Solid Combustibles in Oxygen Atmosphere | RR-19-6 | R. TANAKA and N. SUGAWARA | abst
|
| Quenching Distance of Solids | RR-20-1 | K. KOMAMIYA | abst
|
| Effciency Improvement of the Safety Net -- About Special Character of the Safety Net | RR-20-2 | K. KINOSHITA and K. OGAWA | abst
|
1970
| Title | Book number | Author | abst
ract
|
|---|
| Elimination of Static Electricity by Use of Electrically Conductive Fiber | RR-18-5 | Yasuyuki TABATA | abst
|
| Experimental Study on the Methods of Explosion Venting (First Report) -- Application for a Certain Type of Commercial Box Dryer | RR-19-1 | Noboru TAGUCHI, Heizaburo TURUMI Toshihiro HAYASHI and Hidenori MATUI | abst
|
| Experimental Study on the Methods of Explosion Venting (Second Report) -- Application for a Certain Type of Commercial Dust Collector | RR-19-2 | Noboru TAGUCHI, Heizaburo TURUMI Toshihiro HAYASHI and Hidenori MATUI | abst
|
| Electron Fractographical Study on th Causes of Metals Failure (1std Report) -- Observation of the Fracture Surface of Some Metals by Electron Microscope | RR-19-3 | Eiji AKIYAMA, Taiji KONDO and Yoshio KITUNAI | abst
|
1969
| Title | Book number | Author | abst
ract
|
|---|
| The Quenching Ability of Flame Arresters for n-Hexane | RR-17-4 | Kougaku KOMAMIYA | abst
|
| Fundamental Study of Testing Appratus for Determining Minimum Igniting Current for Explosive Gas Atmospheres | RR-17-5 | Ryuji TANAKA | abst
|
| The Minimum Igniting Currents for Explosive Gas- or Vapour-Air Mixtures by Break-Spark in Low-Voltage d.c. Inductive Circuits | RR-17-6 | Ryuji TANAKA | abst
|
| Basic Study of Intrinsically Safe Circuits for Methane-Air Mixtures under Hyperbaric Pressure | RR-17-7 | Ryuji TANAKA | abst
|
| Studies of Explosive Characeristics of Hydrogen (1st Report) -- Effect of High Pressure on the Flammability Limits of Hydrogen | RR-18-1 | Shozo YAGYU, Hidenori MATSUI, Toei MATSUDA and Hiroshi YASUMOTO | abst
|
| The Tensions in Wire-ropes of Ships' Derricks -- on Union Purchase | RR-18-2 | Teizo HAKAMAZUKA and Soichi KUMEKAWA | abst
|
| The Effect of Vessel Size on Gas Phase Explosion Pressures in Closed Vessels -- A Contribution for the Testing Methods of Flameproof Electrical Equipments | RR-18-3 | Heizaburo TURUMI and Toshihiro HAYASHI | abst
|
| Study of the Human Operator-Plate Mill System -- Development of the Hardware and Software | RR-18-4 | Masashi OKAWA, Takehiko NISHIMOTO, Masataka OSHIDA and Setsuo KAWAHARA | abst
|
You are here:
