2005
| Title | Book number | Author | abst
ract
|
|---|
| Development of an Assessment Method on Wind Resisting in Temporary Structures
|
| SRR-No31-1 | Katsutoshi OHDO | abst
|
| Measurement of Wind Load Acting on the Scaffolds |
| SRR-No31-2 | Katsutoshi OHDO, Seiji TAKANASHI, Yasumichi HINO and Koichi SAITO | abst
|
| The Predictability of Wind Pressure Acting on the Actual Scaffolds by the Wind Tunnel Test |
| SRR-No31-3 | Yasumichi HINO, Noboru SATO, Songpol PHONGKUMSING, Katsutoshi OHDO and Seiji TAKANASHI | abst
|
| Study on the Estimation Method of Wind Pressure Acting on the Temporary Scaffolds |
| SRR-No31-4 | Yasumichi HINO and Songpol PHONGKUMSING | abst
|
| Study on a New Reinforcement Method of Temporary Scaffolds |
| SRR-No31-5 | Yasumichi HINO and Katsutoshi OHDO | abst
|
| Influence of Construction Error on the Mechanical Properties of Tie |
| SRR-No31-6 | Seiji TAKANASHI and Katsutoshi OHDO | abst
|
| Influence of Construction Error on the Mechanical Characteristics of Scaffold |
| SRR-No31-7 | Seiji TAKANASHI and Katsutoshi OHDO | abst
|
| Experimental Study on Risk of Assembling and Dismantling Works of the Scaffolds under Strong Winds |
| SRR-No31-8 | Katsutoshi OHDO, Yasumichi HINO, Seiji TAKANASHI and Noboru SATO | abst
|
| A Study on the Prevention of Accidents Caused by Human Errors in the Construction Work (Final Report)
|
| The Differences of Perceptioons on Occurrence and Prevention of Unsafe Behaviors by Job Position at Construction Sites |
| SRR-No32-1 | Takuro SHOJI, Yoshiyuki EGAWA and Motoya TAKAGI | abst
|
| The Procedure of Communication on Safety Information at Construction Sites |
| SRR-No32-2 | Yoshiyuki EGAWA, Motoya TAKAGI and Takahoro NAKAMURA | abst
|
| Development of a Small Size Simulator for Simulated Experience of Hazard Simulation of Excavator Accident |
| SRR-No32-3 | Kiyoshi FUKAYA and Takahiro NAKAMURA | abst
|
| The Effects of the Imitative-Risk-Experience on the Safety Education for Workers and Related Issues |
| SRR-No32-4 | Takahoro NAKAMURA | abst
|
| Research on Fundamental Safety Technologies for Man-Machine Cooperative Working Systems (Midterm Report)
|
| SRR-No33-1 | Hiroyasu IKEDA and Shigeo UMEZAKI | abst
|
| Propasal of Inherently Safe Design and Safe Design Indexes for Human-Collaborative Robots |
| SRR-No33-2 | Hiroyasu IKEDA and Tsuyoshi SAITO | abst
|
| Measurement of Human Pain Tolerance to Mechanical Stimulus of human-Collaborative Robots |
| SRR-No33-3 | Tsuyoshi SAITO and Hiroyasu IKEDA | abst
|
| Object Zone Detection with Omni-Directional Vision Sensors |
| SRR-No33-4 | Kyoko HAMAJIMA, Jian LU and Koji ISIHARA | abst
|
| The Communication Method for Mobile Robots by Recognizing Gestures of Operators |
| SRR-No33-5 | Jian LU, Wei JIANG and Kyoko HAMAJIMA | abst
|
| Analysis of Fatal Accident Caused by Industrial Machines |
| SRR-No33-6 | Shigeo UMEZAKI and Syoken SHIMIZU | abst
|
| The Basic Consideration on Accident Prevention Strategy ofthe Hazardous Point Nearby Operation |
| SRR-No33-7 | Shigeo UMEZAKI and Syoken SHIMIZU | abst
|
| The Basic Consideration on Accident Prevention Strategy for the Operation Executed by Multiple Operators Cooperating in Large Production Lines |
| SRR-No33-8 | Shigeo UMEZAKI and Syoken SHIMIZU | abst
|
2004
| Title | Book number | Author | abst
ract
|
|---|
| A Study on the Prevention of Explosion and Fires for Recycle Industries (Midterm Report)
|
| SRR-No29-01 | Takayuki ANDO | abst
|
| Measurements of Droplet Size for Calculating Reaction Heat in a Liquid-Liquid Heterogeneous Reaction Process |
| SRR-No29-02 | Yasuhiro FUJIMOTO | abst
|
| The Dust Explosion of Aluminum Dust in Water Vapor |
| SRR-No29-03 | Teruhito OTSUKA and Haruhiko ITAGAKI | abst
|
| Survey of Explosions / Fires by Portable Liquefied Gas Cylinder and the Ignition Experiment |
| SRR-No29-04 | Haruhiko ITAGAKI and Ou-sup HAN | abst
|
| Field Study on Explosion Protection in the Bulky Refuse Crushing Process Facilities |
| SRR-No29-05 | Masaaki YASHIMA | abst
|
| Development of Damage Estimation Technique for Maintenance of Construction Machines
|
| SRR-No30-1 | Etsuji YOSHIHISA and Yutaka MAEDA | abst
|
| Active Load Measurements for Lattice Jib Type Mobile Cranes |
| SRR-No30-2 | Masayuki YOSHIMI, Etsuji YOSHIHISA and Yutaka MAEDA | abst
|
| Stress Measurements for Wheel Crane Boom under Operating Conditions |
| SRR-No30-3 | Etsuji YOSHIHISA, Masayuki YOSHIMI, Yutaka MAEDA, Tetsuya SASAKI and Takashi HONDA | abst
|
| The Improvement of Non-destructive Inspections by Using Thermal Stress Analysis System |
| SRR-No30-4 | Takashi HONDA and Etsuji YOSHIHISA | abst
|
| Ultrasonic Testing on Welded Joints of Thin Plate Modeled upon the Welded Joint on the Corner of a Mobile Crane Boom |
| SRR-No30-5 | Etsuji YOSHIHISA and Takashi HONDA | abst
|
| Development of Fatigue Damage Monitoring Technique for Bolted Joints |
| SRR-No30-6 | Tetsuya SASAKI and Takashi HONDA | abst
|
2003
| Title | Book number | Author | abst
ract
|
|---|
| A Study on the Prevention of Accidents Caused by Human Errors in the Construction Work (Midterm Report)
|
| SRR-No28-1 | Takahiro NAKAMURA | abst
|
| A Survey on the Unsafe Behavior and its Prevention Measures at Construction Sites |
| SRR-No28-2 | Takuro SHOJI and Yoshiyuki EGAWA | abst
|
| Changes of Working Behaviors by Spreading Safety Information in Construction Sites. |
| SRR-No28-3 | Yoshiyuki EGAWA, Takuro SHOJI and Takahiro NAKAMURA | abst
|
| Ergonomics Study on High-Rise Working Conditions in Construction Sites. |
| SRR-No28-4 | Yoshiyuki EGAWA, Shin-nosuke USUI, Takuro SHOJI and Takahiro NAKAMURA | abst
|
| A Study on the Task Performance on the Different Thermal Conditions |
| SRR-No28-5 | Takahiro NAKAMURA, Kiyoshi FUKAYA and Sonoko MANNEN | abst
|
| Eye Movement and Fixation in the Excavator Operation |
| SRR-No28-6 | Takahiro NAKAMURA, Kiyoshi FUKAYA and Sonoko MANNEN | abst
|
| Influences of Time-Pressure in the Excavator Operation |
| SRR-No28-7 | Takahiro NAKAMURA, Kiyoshi FUKAYA and Sonoko MANNEN | abst
|
| Development of Excavator Accident Simulator |
| SRR-No28-8 | Kiyoshi FUKAYA, Takahiro NAKAMURA and Sonoko MANNEN | abst
|
2002
| Title | Book number | Author | abst
ract
|
|---|
| The Development of Comprehensive Safety Control Measures for Production and Construction Systems (Third Report: The Development of Safety Control Technology for Large Scale Industrial Systems
|
| SRR-No24-1 | Shigeo UMEZAKI | abst
|
| The Basic Consideration on the Optimum Design Method of the Safety Control System Using Programmable Electronic Equipment |
| SRR-No24-2 | Shigeo UMEZAKI, Hiroyasu IKEDA, Tsuyoshi SAITO and Noboru SUGIMOTO | abst
|
| The Development and Evaluation of the Two Dimensions Blanking System for the Purpose of Distinguishing between Human Bodies and Objects with the Solid Shape |
| SRR-No24-3 | Shigeo UMEZAKI, Shoken SHIMIZU, Shigenobu KOBAYASHI, Shinji KAWADO, Kenji TAGAMI, Bunji ISHIZAKI, Jyunji MATUI and Tuneo SUZUKI | abst
|
| The Development and Evaluation of the Floating Systems for the Purpose of Distingushing between Human Bodies and Objects with the Plane Shape |
| SRR-No24-4 | Shigeo UMEZAKI, Shoken SHIMIZU, Shigenobu KOBAYASHI and Ichiro WASHIZAKI | abst
|
| The Development and Evaluation of the Laser System Safety Equipment for the Purpose of the Safe Confirmation in Large Scale Working Areas |
| SRR-No24-5 | Shigeo UMEZAKI | abst
|
| The Development and Evaluation of the Safe Confirmation System for Many Operators Cooperating in Large Scale Working Area |
| SRR-No24-6 | Shigeo UMEZAKI | abst
|
| The Development and Evaluation of the Turning Angle Monitor for the Purpose of the Application to Industrial Robots |
| SRR-No24-7 | Shigeo UMEZAKI, Shigenobu KOBAYASHI, Kenjiro HAMADA and Kazushi FUJIWARA | abst
|
| The Development and Evaluation of the Stop-Hold Monitor for the Purpose of the Application to Industrial Robots |
| SRR-No24-8 | Shigeo UMEZAKI, Shigenobu KOBAYASHI, Kenjiro HAMADA and Kazushi FUJIWARA | abst
|
| The Development and Evaluation of Safety Control System for the Logic Machinery Considering Life Cycle Cost and Safety --The Proposal of Distributed Safety Bus Control-- |
| SRR-No24-9 | Shigeo UMEZAKI | abst
|
| Conclusions and Future Problems |
| SRR-No24-10 | Shigeo UMEZAKI | abst
|
| Specific Research on Preventional Countermeasures of Labor Accidents due to Debris Flow
|
| SRR-No25-1 | Noriyuki HORII | abst
|
| Questionnaire Survey regarding On-site Construction Management of Debris Flow |
| SRR-No25-2 | Yasuo TOYOSAWA and Noriyuki HORII | abst
|
| An Experimental Study on the Flow Characteristics of a Debris Flow --Influence of Particle Size and Structure Rigidity on Impact Stress in Model Debris Flow-- |
| SRR-No25-3 | Noriyuki HORII, Yasuo TOYOSAWA, Satoshi TAMATE and Hideo HASHIZUME | abst
|
| Evaluation of Evacuation Time from Debris Flow by On-site Experiments |
| SRR-No25-4 | Yasuo TOYOSAWA and Noriyuki HORII | abst
|
| Detection Method for Debris Flow using Visual Information |
| SRR-No25-5 | Kyoko HAMAJIMA, Noriyuki HORII, Yasuo TOYOSAWA and Satoshi TAMATE | abst
|
| Developmeny of Monitoring and Alarm System for Debris Flow |
| SRR-No25-6 | Yasuo TOYOSAWA, Shigeo UMEZAKI and Noriyuki HORII | abst
|
| Construction of a Support System for Optimum Arrangment of Debris Flow Detection Sensors |
| SRR-No25-7 | Noriyuki HORII, Yasuo TOYOSAWA, Satoshi TAMATE and Kyoko HAMAJIMA | abst
|
| The Development of Comprehensive Safety Control Measures for Production and Construction Systems (Forth Report:Final Reports)
|
| SRR-No26-01 | Shigeo UMEZAKI | abst
|
| Study on Search of Human-Error Cases in Accident Database of Chemical Plant (First Report: Development of a Searching Method of Human-Error Cases from Accident Database) |
| SRR-No26-02 | Ou-Sup HAN, Teruhito OTSUKA, Takaaki MIZUTANI and Yasuhiro FUJIMOTO | abst
|
| Study on Search of Human-Error Cases in Accident Database of Chemical Plant (Second Report: Quantification Analysis on Human-Error Keywords and Accident Reports) |
| SRR-No26-03 | Yasuhiro FUJIMOTO, Teruhito OTSUKA, Takaaki MIZUTANI and Ou-Sup HAN | abst
|
| Hazard Evaluation of Scaffolds Against Wind Load Using Construction-Environmental-Simulator Wind Tunnel |
| SRR-No26-04 | Katsutoshi OHDO, Yasumichi HINO and Songpol PHONGKUMSING | abst
|
| Probabilistic Elastic-Plastic Fracture Analysis of Circumferential Through-Wall-Cracked Pipes Using the First-Order Reliability Method |
| SRR-No26-05 | Tetsuya SASAKI | abst
|
| Study on Risk Reduction Process and Safety Designing for Construction Robots |
| SRR-No26-06 | Hiroyasu IKEDA, Shoken SHIMIZU, Tsuyoshi SAITO, Jian LU and Masanori ONISHI | abst
|
| Development of Navigation Vision System for Construction Robots |
| SRR-No26-07 | Jian LU, Hiroyasu IKEDA and Katsumi YASUDA | abst
|
| Development of a Construction Robots Immunity System Simulating Conducted Disturbances on the Shop Floor |
| SRR-No26-08 | Hajime TOMITA and Toshiyuki UEKI | abst
|
| The Basic Study on the Construction Method of the Safety Control System Considering the Coexistence of Availability and Safety |
| SRR-No26-09 | Shigeo UMEZAKI and Shoken SHIMIZU | abst
|
| Development of the Safety Design Supporting System for the Purpose of the Optimum Design of Man-Machine System |
| SRR-No26-10 | Shoken SHIMIZU and Shigeo UMEZAKI | abst
|
| SRR-No26-11 | Shigeo UMEZAKI | abst
|
| Comprehensive Study on Preventive Techniques for Industrial Explosions in Chemical Processes
|
| SRR-No27-1 | Hidenori MATSUI | abst
|
| A Survey on Evaluation Techniques of Reaction Runaway Hazards in Chemical Processes |
| SRR-No27-2 | Takayuki ANDO, Yasuhiro FUJIMOTO and Mieko KUMASAKI | abst
|
| Real Time Optimization of Reaction Parameter and Measurement Prediction |
| SRR-No27-3 | Teruhito OHTSUKA, Takaaki MIZUTANI, Ou-Sup HAN and Yasuhiro FUJIMOTO | abst
|
| A New Prediction Method of Heart Releasa Rate for Heterogeneous Liquid-Liquid Batch Reactions with the Agitation Speed |
| SRR-No27-4 | Yasuhiro FUJIMOTO | abst
|
| Propagatation Behavior and Mechanisms of the Dust Flame in a Duct |
| SRR-No27-5 | Ou-Sup HAN, Masaaki YASHIMA and Toei MATSUDA | abst
|
| Suppression of Dust Flames Propagating in a Duct (Quenching with Water Sprays, Wire Gauze and Isolation by Inert Gas) |
| SRR-No27-6 | Masaaki YASHIMA | abst
|
| The Evaluation of Insulation in a Method Wiring Board by the Monitor Using Wiring Board of the Comb-pattern |
| SRR-No27-7 | Tatsuo MOTOYAMA | abst
|
| Basic Requirements and a Construction Method for a Gas Detection System with Asymmetrical Failure Characteristics |
| SRR-No27-8 | Tsuyoshi SAITO, Hiroyasu IKEDA and Noboru SUGIMOTO | abst
|
| Safety Control Design and Safety Evaluation for Computerized Plant System |
| SRR-No27-9 | Hiroyasu IKEDA, Tsuyoshi Saito and Noboru SUGIMOTO | abst
|
| Development of the Chemical Process Accident Database |
| SRR-No27-10 | Haruhiko ITAGAKI | abst
|
| Development of the Support System for Prevention of Explosions at Chemical Processes |
| SRR-No27-11 | Haruhiko ITAGAKI | abst
|
2001
| Title | Book number | Author | abst
ract
|
|---|
| Ergonomic Studies on Analyzing the Risk of Accidental Falls in High-Rise Construction Works
|
| SRR-No22-1 | Yoshimasa KAWAJIRI, Yoshimi SUZUKI and Hisao NAGATA | abst
|
| A Questionnaire Survey to Construction Workers on Human Factors Concerning Falling-Accident |
| SRR-No22-2 | Yoshimi SUZUKI, Shin-nosuke USUI, Yoshiyuki EGAWA and Takuro SHOJI | abst
|
| An Analysis of Physiological and Psychological Workload for Workmen on Scaffolding |
| SRR-No22-3 | Yoshiyuki EGAWA and Shin-nosuke USUI | abst
|
| Working Limits and Safety Limits in Regards to Accidental Falls for Wind-Induced Vibration during High-Rise Construction Work |
| SRR-No22-4 | Katsutoshi OHDO and Hisao NAGATA | abst
|
| Sliding Properties on Pitched Roofing Surfaces |
| SRR-No22-5 | Hisao NAGATA, Seiji TAKANASHI and Yoshimasa KAWAJIRI | abst
|
| A Study on Safety Measures for Exacavators Using Virtual Reality Technology
|
| SRR-No23-1 | Kiyoshi FUKAYA and Shigeo UMEZAKI | abst
|
| Development of Excavator Operation Simulator |
| SRR-No23-2 | Kiyoshi FUKAYA, Shigeo UMEZAKI, Jian LU, Takahiro NAKAMURA and Yoshiyuki EGAWA | abst
|
| Eye Movement and Useful Field of View in the Operation of Exacavator |
| SRR-No23-3 | Takahiro NAKAMURA,Kiyoshi FUKAYA, Jian LU,Yoshiyuki EGAWA and Hikaru KOSHIMIZU | abst
|
| Detection of Intrusion into the Dangerous Region by Image Recognition and Measurement |
| SRR-No23-4 | Jian LU and Kiyoshi FUKAYA | abst
|
| Countermeasure Against Human's Approaching an Excavator |
| SRR-No23-5 | Kiyoshi FUKAYA | abst
|
2000
| Title | Book number | Author | abst
ract
|
|---|
| Study on Safety Countermeasure of Cranes Against Earthquake
|
| SRR-No20-1 | Yutaka MAEDA and Yoshio KITSUNAI | abst
|
| Survey of Damage of Cranes in the Southern Hyogo-prefecture Earthquake |
| SRR-No20-2 | Yoshio KITSUNAI and Yutaka MAEDA | abst
|
| The Vibration Characteristics of the Tower Crane Used in the Construction Site |
| SRR-No20-3 | Seiji TAKANASHI, Akira TSUBOTA and Kimio KIKUCHI | abst
|
| Vibration Test on Model of Construction Tower Crane |
| SRR-No20-4 | Katsutoshi OHDO and Takanobu SUZUKI | abst
|
| Buckling Strength of Stay of Construction Tower Crane |
| SRR-No20-5 | Katsutoshi OHDO and Etsuji YOSHIHISA | abst
|
| SRR-No20-6 | Yutaka MAEDA | abst
|
| Development of Comprehensive Safety Control Measures for Production and Construction Systems (Second Report; Development of Hazard Evaluation Methods for Large Scale Industrial Systems and Safety Control Measures for Construction Robots)
|
| SRR-No21-1 | Shigeo UMEZAKI | abst
|
| Hazard Evaluation for Collapse of Scaffolds due to Wind |
| SRR-No21-2 | Katsutoshi OHDO, Yasumichi HINO and Yoshinori YONEYAMA | abst
|
| Improvement of a Non-Linear Optimization Algorithm for Structural Reliability Analyses |
| SRR-No21-3 | Tetsuya SASAKI | abst
|
| Development of a Human-error Prediction Estimator |
| SRR-No21-4 | Jian LU, Shigeo UMEZAKI and Kiyoshi FUKAYA | abst
|
| Report of the Investigation Meetings on the Safety Control Technology for Construction Robots and Research Subjects |
| SRR-No21-5 | Hiroyasu IKEDA, Shigeo UMEZAKI, Tetsuya SASAKI, Shoken SHIMIZU, Hajime TOMITA, Jian LU, Katsutoshi OHDO and Seiji TAKANASHI | abst
|
| Development of the Safety Control System for Construction Robots --Inherently Safe Manipulator and Hierarchized Sensing System-- |
| SRR-No21-6 | Hiroyasu IKEDA, Noboru SUGIMOTO, Shoken SHIMIZU and Jian LU | abst
|
1999
| Title | Book number | Author | abst
ract
|
|---|
| Prevention of Explosions and Fires of New Materials Caused by Static Electricity
|
| SRR-No17-1 | Yasuyuki TABATA | abst
|
| Measurement of Minimum Ignition Energies for Combustible Fine Powders |
| SRR-No17-2 | Toei MATSUDA, Hajime TOMITA and Tsutomu KODAMA | abst
|
| Measurement of Minimum Ignition Energies for Flammable Mists |
| SRR-No17-3 | Hidenori MATSUI and Teruhito OHTSUKA | abst
|
| Effect of Discharge Conditions on Measuring Minimum Ignition Energy for Dusts |
| SRR-No17-4 | Mizuki YAMAGUMA, Tsutomu KODAMA and Pei-Lan WANG | abst
|
| Development of the Vibrating Type Minimum Ignition Energy Measurement System |
| SRR-No17-5 | Mizuki YAMAGUMA, Tsutomu KODAMA and Wai-Lam CHEUNG | abst
|
| Measurement of Electrostatic Properties of Flexible Intermediate Bulk Containers |
| SRR-No17-6 | Tsutomu KODAMA, Mizuki YAMAGUMA and Shonosuke KAMACHI | abst
|
| Electrostatic Safety Evaluation for Pneumatic Powder Transport |
| SRR-No17-7 | Tsutomu KODAMA, Koujirou NISHIMURA and Yasuyuki TABATA | abst
|
| Evaluation of Electrostatic Hazards Caused by Charged Powders during Tank Filling Using Particle Simulation --Dependence of Particle Size-- |
| SRR-No17-8 | Atsushi OHSAWA | abst
|
| Electrostatic Charging on Liquid Caused by Spraying |
| SRR-No17-9 | Yasuyuki TABATA, Tsutomu KODAMA and Atsushi OHSAWA | abst
|
| SRR-No17-10 | Tsutomu KODAMA | abst
|
| Cases of Explosions and Fires Caused by Static Elestricity |
| SRR-No17-AP | |
|
| Study on New Inspection Techniques for Lifting Apparatus --Focused on failure of crane wire ropes--
|
| SRR-No18-1 | Masazumi TANAKA | abst
|
| Analysis of Fracture Accidents of Crane Wire Ropes and the Problem Included |
| SRR-No18-2 | Masazumi TANAKA | abst
|
| On the Propeties of Internal Damage of Crane Wire Ropes |
| SRR-No18-3 | Masazumi TANAKA | abst
|
| Analysis of Progression Properties of Wire Breaking Damage |
| SRR-No18-4 | Masazumi TANAKA | abst
|
| Fretting Fatigue Behavior of Wire Rope Steel and SNCM439 Steel |
| SRR-No18-5 | Yoshio KITSUNAI, S.Genesh Sundara Raman and Muthuswamy Kamaraj | abst
|
| On the Countermeasures for Preventing Wire Rope Fracture Accidents |
| SRR-No18-6 | Masazumi TANAKA | abst
|
| SRR-No18-7 | Masazumi TANAKA | abst
|
| Development of Comprehensive Safety Control Measures for Production and Construction Systems (First Report:Survey of Current Technology)
|
| SRR-No19-1 | Shigeo UMEZAKI |
|
| Survey of Computerized Safety Control Systems |
| SRR-No19-2 | Hiroyasu IKEDA |
|
| Survey of Current Technology Related to Electro-Magnetic Compatibirity |
| SRR-No19-3 | Hajime TOMITA |
|
| Investigation of Safety measures for Productions |
| SRR-No19-Ref1 | Shoken SHIMIZU, Shigeo UMEZAKI and Hiroyasu IKEDA |
|
| Investigation of Image Sensors For Safety Control |
| SRR-No19-Ref2 | Jian LU |
|
| Investigation of Software Technology for Safety |
| SRR-No19-Ref3 | Tetsuya SASAKI |
|
| Investigation of Simulation Technology for Safety |
| SRR-No19-Ref4 | Kiyoshi FUKAYA |
|
| Investigation of Automatic Construction Systems |
| SRR-No19-Ref5 | Seiji TAKANASHI |
|
1996
| Title | Book number | Author | abst
ract
|
|---|
| Prevention of Failure of Overhead Travelling Cranes Due to Degradation of Components
|
| SRR-No15-1 | Yoshio KITSUNAI | abst
|
| Survey of Degradation for Overhead Travelling Cranes |
| SRR-No15-2 | Yoshio KITSUNAI and Yutaka MAEDA | abst
|
| Monitoring of Service Loading for Overhead Travelling Crane |
| SRR-No15-3 | Yutaka MAEDA, Yoshio KITSUNAI and Etsuji YOSHIHISA | abst
|
| Estimation of Fatigue Crack Grouwth Behavior of HT80 Steel Weldments under Variable-Amplitude Loading |
| SRR-No15-4 | Etsuji YOSHIHISA and Yoshio KITSUNAI | abst
|
| Fatigue Strength and Life Prediction for Gusset Welded Joints |
| SRR-No15-5 | Yoshio KITSUNAI, Yutaka MAEDA and Etsuji YOSHIHISA | abst
|
| Fatigue Strength of Repaired Weldments |
| SRR-No15-6 | Yoshio KITSUNAI, Yutaka MAEDA and Etsuji YOSHIHISA | abst
|
| SRR-No15-7 | Yoshio KITSUNAI | abst
|
| Development of Devices and Working Systems for Promoting Safety of Aged Workers (Second Report)
|
| SRR-No16-1 | Shigeo UMEZAKI and Soichi KUMEKAWA, | abst
|
| Development of Safety Control System of Heavy Work Handing by the Cooperative Control of Crane and Manipulator |
| SRR-No16-2 | Noboru SUGIMOTO and Hiroyasu IKEDA | abst
|
| Development of Chasing Carriage Vehicle |
| SRR-No16-3 | Hiroyasu IKEDA and Noboru SUGIMOTO | abst
|
| Development of Safety Systems of Automated Warehouses for Assisting Aged Workers |
| SRR-No16-4 | Shigeo UMEZAKI,Kiyoshi FUKAYA, Soichi KUMEKAWA and Shoken SHIMIZU | abst
|
| Development of Safety Device of Laser Beam Type for Compensating Visual Ability of Aged Workers |
| SRR-No16-5 | Shigeo UMEZAKI, Kiyoshi FUKAYA and Hiroyasu IKEDA | abst
|
| Start-up Alarm System for Reducing Work Load on Aged Workers |
| SRR-No16-6 | Kiyoshi FUKAYA | abst
|
| Logical Study on Danger Zone Guard System in Automated Warehouses |
| SRR-No16-7 | Kiyoshi FUKAYA, Soichi KUMEKAWA and Shigeo UMEZAKI | abst
|
| SRR-No16-8 | Shigeo UMEZAKI and Soichi KUMEKAWA | abst
|
| SRR-No16-AP | |
|
1993
| Title | Book number | Author | abst
ract
|
|---|
| Study on Prevention of Explosions and Fires caused by New Materials
|
| SRR-No12-1 | Shigeru MORISAKI | abst
|
| Explosion Characteristics of Arsine,Silane and Phoshine in Air |
| SRR-No12-2 | Toshihiro HAYASHI | abst
|
| Explosive Reaction Rare Earth Elements with a Halogen-Containing Solvent |
| SRR-No12-3 | Takashi KOTOYORI and Takayuki ANDO | abst
|
| Flammability Evaluation of Halogenatited Hydrocarbons such as Flon Substitutes |
| SRR-No12-4 | Hidenori MATSUI | abst
|
| Ignition Hazard Evaluation of Metal Powders |
| SRR-No12-5 | Hidenori MATSUI | abst
|
| Dust Explosion Hazards of New Magnetic Materials |
| SRR-No12-6 | Toei MATSUDA | abst
|
| Dust Explosibility of Fine Ceramic Powders |
| SRR-No12-7 | Toei MATSUDA | abst
|
| Dust Explosion Hazards of Metallic Silicon |
| SRR-No12-8 | Toei MATSUDA | abst
|
| Evaluation of Dust Explosibility by a Testing Method |
| SRR-No12-9 | Toei MATSUDA and Hidenori MATSUI | abst
|
| A BAM Heat-Accumulation Storage Test on 1,2-naphthoquinone-2-diazido-5-sulfonyl chloride |
| SRR-No12-10 | Takashi KOTOYORI | abst
|
| Evaluation of Explosion and Fire Hazards in Manufacturing Process of Organic New Materials |
| SRR-No12-11 | Takayuki ANDO | abst
|
| Case Histories of Explosion and Fire caused by New Materials |
| SRR-No12-AP | |
|
| Development of Devices and Working Systems for Promoting Safety of Aged Workers (First Report)
|
| SRR-No13-1 | Shigeo UMEZAKI and Kiyoshi FUKAYA | abst
|
| Falling Accidents and Evaluation of Potential Risk of Fatal Falls of Elderly People |
| SRR-No13-2 | Hisao NAGATA | abst
|
| Effects of Noise in Work-Place on Performance of Elderly Workers |
| SRR-No13-3 | Yoshiyuki EGAWA | abst
|
| An Experimental Study on Risk Perception of Aged People |
| SRR-No13-4 | Shinnosuke USUI | abst
|
| Evaluation of Danger Perception Ability by Tactile Sense of the Aged |
| SRR-No13-5 | Kiyoshi FUKAYA | abst
|
| Improvement of Operation Devices Suitable for Aged Workers |
| SRR-No13-6 | Kiyoshi FUKAYA, Hiroyasu IKEDA, Shigeo UMEZAKI and Shoken SHIMIZU | abst
|
| Safety Evaluation of Prevention System for Crushing in Warehouse |
| SRR-No13-7 | Shigeo UMEZAKI and Shoken SHIMIZU | abst
|
| Summary and Subject of Future Studies |
| SRR-No13-8 | | abst
|
1983
| Title | Book number | Author | abst
ract
|
|---|
| Special Research of Integrated Safetymeasures for Woodworking Machinery
|
| SRR-82-1-1 | Teizo HAKAMAZUKA | abst
|
| Systematical Analysis of Countermeasures against Hazards Involved in Operation of Woodworking Machinery by using MORT |
| SRR-82-1-2 | Yoshinobu SATO, Kiyoshi FUKAYA and Yoshiyuki EGAWA | abst
|
| Study of the Functional Safety Measures for Multiuse Woodworking Equipments |
| SRR-82-1-3 | Noboru SUGIMOTO, Yoshinobu SATO and Kiyoshi FUKAYA | abst
|
| Study on Prevention to Blade Injuries by Sawing Machine |
| SRR-82-1-4 | Kiyoshi FUKAYA and Noboru SUGIMOTO | abst
|
| New Models of Wood-Shavings Collectors for the Molding Machine with High Speed Single Spindle |
| SRR-82-1-5 | Kinichi KINOSHITA | abst
|
| Dust Explosion avd Fire Hazards in a Wood-Dust collecting System |
| SRR-82-1-6 | Toei MATSUDA and Michio NAITO | abst
|
| Oxidative Self-Heating Behaviors of Fifteen Different Species of Wood Powder |
| SRR-82-1-7 | Takashi KOTOYORI and Michio NAITO | abst
|
| An Investigation of Minimum Ignition Energies for the Layers of Some Wood Dusts |
| SRR-82-1-8 | Toei MATSUDA and Michio NAITO | abst
|
| Special Research on Thermal Stability of Reactive Materials
|
| SRR-83-1 | Shigeru MORISAKI, Kogaku KOMAMIYA and Michio NAITO | abst
|
You are here:
